New Technology, Green Manufacturing | A Full Review of Xiecheng's Appearance at CHINAPLAS 2025

CHINAPLAS 2025 

THE WORLD'S LEADING PLASTICS AND RUBBER TRADE FAIR

On April 18, with the successful conclusion of the exhibition, the four-day 37th China International Plastics and Rubber Industry Exhibition (CHINAPLAS 2025 International Rubber and Plastics Exhibition) successfully concluded at the China Shenzhen World Convention and Exhibition Center (Bao'an). As a weathervane event in the rubber and plastics industry, this exhibition attracted professional visitors from home and abroad to participate in the event.

Guangdong Xiecheng Intelligent Equipment Co., Ltd. (hereinafter referred to as "Xiecheng") has gained a lot of fans with the keywords of "digitalization, intelligence, energy saving and environmental protection". With its six core plastic molding peripheral automation auxiliary equipment series and digital intelligent factory system solutions, it has presented a technological feast of the integrated development of efficient, intelligent and green manufacturing to global customers. Xiecheng has become one of the focuses of attention at the exhibition with its strength.

Focus on green smart manufacturing, innovative products are unveiled

At the crowded site, new products such as the water-cooled air suspension chiller, natural cooling air-cooled chiller, and adaptive intelligent energy-saving crusher control system were released for the first time. Adaptive intelligent energy-saving dryers with energy savings of 30%-80%, adaptive intelligent energy-saving dehumidification dryers with energy savings of 25%-60%, and new high-efficiency energy-saving dryers were all unveiled, fully demonstrating the technical achievements of Xiecheng in energy conservation, environmental protection, and intelligent control.

01 Water-cooled air suspension chiller

Features：

1. The air suspension chiller uses R134a environmentally friendly refrigerant. Compared with ordinary screw chillers, the comprehensive energy saving can reach 50% and the COP reaches 7.0； 

2. It uses a dynamic pressure air suspension compressor, which runs without friction, has low mechanical loss, can be started and stopped continuously and runs stably, does not require maintenance, and has a long service life;

3. The design of the two devices adopts domestic new heat exchange tubes, and combines the system's heat exchange design and fluid simulation technology to maximize the heat exchange capacity of the two devices.

02 Natural cooling air-cooled chiller

Features：

1. The refrigerant uses R410a environmentally friendly refrigerant with good refrigeration effect;   

2. Use natural cooling heat exchanger. In natural cooling mode, use the outside cold air to reduce the cooling water temperature;   

3. Integrated natural cooling function, providing three intelligent operation modes: standard cooling, mixed cooling and natural cooling;  

4. Equipped with an intelligent control system that can monitor ambient temperature, unit operating status, load demand in real time, and automatically switch operating modes to maximize efficiency throughout the year.  

03 Adaptive intelligent energy-saving crusher control system

Features：

1. Equipped with adaptive intelligent energy-saving control system, the system can monitor the load changes of the machine in real time, and automatically adjust the voltage and current output according to the real-time load data by using PWM regulation technology. The energy-saving model can save 20%-40% energy compared with the ordinary model under the same working conditions;  

2. The use of thyristor control has higher response speed, reliability and safety, and better performance in vibration and dust resistance;  

3. It adopts touch screen display, equipped with 24-hour timing function, phase sequence detection function, material level detection function, recovery fan and powder screening fan control function, and communication function can realize automatic remote management.  

04 Water-cooled air suspension chiller

Features：

1. High efficiency and energy saving, compared with ordinary models under the same working conditions, it can save energy by 30%-80%；  

2. Built-in a variety of common raw material process formulas, you only need to select the type of raw material, the system will automatically set the drying temperature and air volume;  

3. Adaptive function: after setting the temperature, the system automatically adjusts the air volume; 

4. Automatic heat preservation function: when the machine stops feeding, it will automatically enter the heat preservation state, saving energy, preventing the raw materials from being over-dried, and ensuring that dry raw materials can be provided at any time; 

5. Energy-saving intelligent control box can be sold separately.  

05 Adaptive intelligent energy-saving dehumidification dryer

Features：

1. High efficiency and energy saving, compared with ordinary models under the same working conditions, it can save 25%-60% energy;  

2. It integrates the functions of dehumidification, drying and two-stage feeding, and the three-stage feeding function can be selected;  

3. Built-in a variety of common raw material process formulas, you only need to select the type of raw material, the system will automatically set the drying temperature and air volume; 

4. Adaptive function: after setting the temperature, the system automatically adjusts the air volume; 

5. Automatic keep-warm function: when the machine stops feeding, it will automatically enter the keep-warm state, saving energy, preventing the raw materials from being over-dried, and ensuring that dry raw materials can be provided at any time. 

06 High-efficiency energy-saving dryer

Features：

1. The downward blowing structure design is adopted to reduce the temperature difference between the inlet air temperature and the electric heating temperature, ensuring the stability of the inlet air temperature;  

2. The heating box adopts a double-layer insulation structure design to reduce power consumption while avoiding excessive temperature around the machine; 

3. With over-temperature tripping function, when the drying temperature exceeds the set temperature deviation value, the power supply will be automatically cut off; 

4. The barrel and hopper are designed to be separated and equipped with a cleaning door for easy cleaning.  

In addition, during this exhibition, Xiecheng also exhibited a number of hard-core upgraded products, such as a metering masterbatch mixer with a new modular design, a water-electric separation mold temperature controller that solves the problem of damage to the heating wire caused by scale, and a Europeanized photoelectric suction machine in the feeding and conveying series, etc., with full details and an upgraded experience.

Newly upgraded digital system to enable smart factories

We also demonstrated a newly upgraded intelligent IoT monitoring and management system, which can be efficiently interconnected with plastic molding peripheral auxiliary equipment, automation units, etc., to build a smart ecosystem. By flexibly integrating upstream and downstream data of the industrial chain into the manufacturing ecosystem, we provide plastic molding factories with all-round intelligent empowerment, covering equipment status, process control, full life cycle management, and energy consumption collection.

Powerful cooperation to build efficient and energy-saving automated production solutions

In this exhibition, Xiecheng not only exhibited in an independent booth in the Auxiliary Machine Hall, but also jointly displayed with well-known host brands to jointly create an "host + auxiliary machine" integrated intelligent energy-saving solution, which attracted a large number of professional visitors to stop and communicate, and the popularity of the scene continued to rise.

Guests and friends gathered together to celebrate the event

During the exhibition, the Xiecheng booth was crowded with visitors. The new product display and energy-saving equipment attracted a large number of professional visitors and potential customers, and received extensive attention and positive feedback. Many industry media also conducted on-site interviews with Xiecheng, fully demonstrating the brand's influence and technological leadership in the industry.

Looking to the future, we will continue to empower our global customers

Although CHINAPLAS 2025 has ended, the excitement will not stop. We sincerely thank every visitor who came to the exhibition site, and thank every customer and partner for their trust and support. Keep moving forward and keep exploring. In the future, Xiecheng will continue to focus on the development of the plastics industry, continue to promote product innovation, process optimization and service upgrades, continue to meet the strong market demand for advanced technologies, and provide the most competitive products and solutions for global customers and partners!